Social Icons

Pages

Friday, November 11, 2016

Simple Steps To Be Followed In A Chimney Cleaning

By Christine Scott


Chimneys are types of structures that are providing a proper ventilation for smoke and flue gases that are coming from stoves, fireplaces, boilers, or furnaces towards the outside atmosphere. Typically, these are positioned vertically for ensuring that gases are flowing smoothly upwards. A flue is the space inside the chimney. Chimneys are often found in steam locomotives, ships, and buildings.

Burning fires that may come out from chimneys can sometimes be difficult to avoid. These may cause fire because of some substances like soot and creosote which are flammable and sticky. Doing a chimney cleaning Windsor Locks CT may be done if you will be hiring a professional to do the job, but this may cost you much. So here are some simple steps that you can follow to do a safe cleaning by yourself.

These steps involve four different methods. First is to prepare for cleaning. But before starting the process, determine first whether the chimney would really need this process for cleaning. The most typical time for the chimneys to be cleaned is once a year. Frequent use of it often gets it dirty, so to clean it regularly is needed. Due to being dormant may be for a while, some animals may have been nesting in it so better check it.

Next is to measure the flue. When you do the method for cleaning, be sure to use the appropriate tools and be sure that these tools have sizes that would fit in the flue. Measuring all the sides from the fireplace or the bottom part is important, then after, by the use of a ladder, climb up to measure the top. All necessary supplies can be purchased from a nearby hardware store.

You must also dress appropriately. You may use your old clothes so that you will not mind on getting messy because of the soot. A bandanna can be used for covering the hair. Use gloves for protecting the hands and goggles for the eyes. Place the drop cloth or the plastic tarp on the floor to avoid the house from getting dirty. Look for the damper then clean it with the brush.

Second is cleaning first the top and to the bottom. Get a ladder to climb up unto the roof. The ladder may also be set up outside the home when climbing unto your roof, but just make sure that it is safe. Next is assembling the brush and the pipe section for flue scrubbing. There are several sections available that can be added into the pipe to make the brush longer.

The third method is to clean from bottom to top. Steps in the second method are also applied in using the pipe sections and brushes. After doing the same steps to clean from the bottom to the top, use the pulley system along with a brush and place it on the roof.

In this step, it might be helpful if you are going to hire someone for holding one side if the rope from the roof then the other side will be dropped. At the center of a pulley is the brush. Then work with your partner together by pulling that pulley rope in an up and down manner. It works by scrubbing the brush in chimney flue.

Lastly is removing dirt from flue entrance using the shovel and the spade. Reattach then the damper handle that was removed in the first method. A drop cloth or a plastic tarp may obtain debris, us a dustpan and a broom to clean it.




About the Author:



No comments:

Post a Comment